• Nov , 23 2020

Installing a washdown pump is a project that any capable do-it-yourself can accomplish. The trickiest part, as is often the case, is in the planning-choosing a location for the pump and outlet and making sure you have all the right supplies. Most washdown pumps are plumbed to draw directly from the water your sailing in (fresh or salt), in which case, the amount of water available for use is unlim...

• Nov , 07 2020

The primary job of most bilge pumps on most boats is to clear nuisance water from the bilges (packing gland drips, spray from an errant wave, etc.). The one that came with your boat may be up to that task, but a bilge pump should also be able to provide crucial extra time if your boat is taking on water. A bilge pump system is your primary insurance policy in avoiding unexpected sinking and losing...

• Nov , 06 2020

The right pump is a critical part of today’s agricultural irrigation systems. Without them, these systems could not function efficiently and lead to lost money, water, and crops. There are pumps for many different types of applications. Some of the applications require pumps made a specific way, with specific materials. Many irrigation systems are pressurized and therefore need a pump. Because the...

• Jul , 17 2020

1. The sprayer is recommended for use in spraying agricultural pesticides, water and other non-flammable liquids. Improper use may cause damage to the sprayer and user. 2. Do not use flammable or corrosive chemicals in the tank sprayer. Contact factory or agent for suggestions about any uncertain chemicals. 3. Wear protective clothing, eye protection, and chemical resistant gloves when filling, us...

• Jul , 17 2020

Reassembly Pump head(3)to Motor(4). 1. Assemble the pump head (3)to motor(4)aligning screws tabs. 2. Install screw(2)and tighten to 15 inch ounces of torque. 3. Reconnect wires(5)to pressures switch.Wires can be connected to either terminal of the pressure switch. 4. Install the pressure switch cover with screw(1). 5. Reconnect pump to liquid source. 6. Reconnect pump to power source. 7. Allow pum...

• Jul , 02 2020

Disassemble pump head l Take precaution to prevent injury due to chemical contact during maintenance. l Flush Pump with water or neutralizing agent before servicing if the pump has l been used to trans port chemicals. l Disconnect the power to the pump motor. l Remove the pressure switch cover by removing the single Screw(1)from l pressure switch and remove ...

• Jul , 02 2020

Troubleshooting on pumps   These tips will help you to maintain the pumps quickly   Failure to Prime-Motor operates,but no pump discharge l Restricted intake or discharge line.Open all line valves. check for“Jammed” check valves, and clean clogged lines. l Air leak intake line. l Punctured pump diaphragm. l Defective pump check valve. l C...

• Jun , 03 2020

black-lager beer style guide Color: Very dark brown to black ABV: 4%-6% Commercial Examples: Spoetzl Bohemian Black Lager, Saranac Black Forest, Sam Adams Black Lager You may look at a black lager in a pint glass and shout “stout!” or “porter!” And that’s a fair mistake, considering you can only tell so much from looking at a beer. But what differentiates a Black Lager from other dark beers, espec...

• May , 12 2020

IPA:India Pale Ale Color: Pale gold to red, copper ABV: 6%-7.5% Commercial Examples: Lagunitas IPA, Russian River Brewing Company Blind Pig IPA, Dogfish Head 60 Minute IPA The most beloved acronym in all of craft beer. (Okay, may be ABV and IBU have some stake in the game, too.) Suffice to say, whether you’re a fan or not, you’ve heard of IPA, and maybe you’re wondering what all the fuss is about....

• May , 12 2020

The differences between refined beer and industrial beer Refined beer Industrial beer Materials Water,malt,hops,yeast water,rice,amilum,malt,hops,yeast,other additives Additives NO Kinds of additives Fermentation days Max to 2 month 7 days Brewing Mode Ale, raga,nature Only raga Production Capacity Little but high quality High productivity Color Pale ye...